2

STRM-RM MH2

Photo STRM-RM MH2

STRM-RM MH2

Hub for remote reading of AMR radio stations

The “STRM-RM MH2″ device is a hub for remote reading of antennas AMR type Qundis, Siemeca (Siemens) e Honeywell, that has the purpose of reading the data and send it to the user via E-Mail.
Internet connection for the sending of data occurs by using the embedded GSM/GPRS modem or Ethernet interface.
The reading values are sent via e-mail, and are available in an attached, “.csv” file – formatted and directly readable in Excel (or an equivalent program).
The device may be remotely configured by SMS or through the internal web server, or locally using the “STXM Reader” software.
Is possible to connect to remote AMR antenna, through the GSM modem and the “GSM Caller” software (supplied separately), in this way you do not need to go to the antenna site to accomplish the desired configurations.
Moreover, the following devices are available:
– With datalogger for data storage;
– With multi AMR radio station connections to the hub.

  • Power supply: 230Vac 50/60Hz, 15 W (Max.)
  • USB port for local device reading and configuration.
  • Operational temperature: 0 – 45 °C.
  • GSM/GPRS Quad Band Modem.
  • LED GSM field intensity indicator.
  • 3 digital inputs (contact).
  • 2 relay outputs 6(2)A 250Vac with changeover contact.
  • RJ45 connector for Ethernet connection.
  • LED internet connection line status indicator.
  • M-Bus Master Port (2400 Baud) protected against overload and short-circuits.
  • LED M-Bus line status indicator.
  • Read antennas type Qundis AMR, Siemens AMR e Honeywell AMR.
  • Reading data sent in “.csv” format, in table form, directly readable in Excel (or equivalent program).
  • Set up of up to two schedulers to automatically send readings daily, weekly or monthly, as well as sending the meter values to configured e-mail recipients.
  • A name may be assigned to each device.
  • Saving all the commands sent and received in a dedicated file in “CSV” format, with the possibility to send the file via E-mail.
  • Automatic update of date and time, with standard time and daylight saving time management.
  • Possibility to configure remotely antenna AMR via GSM modem and “GSM Caller” (accessories supplied separately).
  • Receiving SMS from telephone operator (credit low, credit check etc…).
  • Ability to select the data transmission mode between Ethernet and GPRS.
  • Remote device configuration by means of sending text messages or through the internal web server, or locally by means of PC and “STXM Reader” software.
  • The user, through the connection to the remote control system can:
    1. Verify the status of the control unit (alarms, data).
    2. Request the sending of the current system readings
    3. Configure the device.
    4. Command available output relays (configurable in on/off or impulsive mode).
  • The remote control system, if configured, to change the status of any input, send a warning SMS to selected phone numbers.
  • Verifies device alarms (failures or tampering), able to be set up via the scheduler, with reports of possible anomalies via text message to the telephone numbers set up.
  • Possibility to monitor the AMR antennas, for checking the battery level, and any errors. For this you must manually add to the list through the command “MBLISTA=ADD”.
  • Fastening: Fastening on DIN EN 607 rails.
  • Color: Grey RAL 7035.
  • Material: Self-extinguishing PPO
  • Dimensions: 9 DIN modules.
  • STRM-500RM-MH2: Hub for reading of AMR radio stations, and data sending via E-mail with GPRS or Ethernet connection.
  • STRM-750RM-M-MH2: Hub for the reading of multiple AMR radio stations, and data sending via E-mail with GPRS or Ethernet connection.